40200 FlashLinkPDF Logger F 14L1

FlashLink® PDF Multi-Use Data Logger, Model 40202, 40203

This plug-and-play temperature logger comes pre-programmed and can be reused again and again. After each use, the data is downloaded to a USB enabled device as an encrypted PDF file with a unique identification number for record keeping and traceability. Once data is retrieved, simply reset the unit by pushing and holding both buttons till the data is cleared and a new trip ID is created. This makes it a cost-effective cold chain management and logistics solution for monitoring temperature-sensitive commodities during shipping and/or storage. The FlashLink PDF Multi-Use Data Logger is ideal for tracking products transported between facilities or as an economical replacement for reusable chart recorders. The logger has the ability to monitor environmental conditions in temperature controlled facilities, such as warehouses, distribution centers, processing, packaging or staging areas.

Factory configured, users do not program this unit. In addition, no software is needed to download data as the logger features onboard software which simply needs a USB enabled device to access the information. The download is a secure, encrypted PDF report which is automatically saved on the local hard drive. Custom configurations are available from the factory to pre-configure logging parameters, such as customized high/low alarm limits, logging intervals and delayed start.

  • Unit is designed to be used multiple times
  • Logger is provided pre-programed
  • No software needed to download data
  • Built-in USB connector, no special reading devices required
  • Stops recording after downloading data
  • Automatically creates secure PDF report and CSV file
  • Push-button resets and restarts unit for next use
  • Temperature statistics available on LCD
  • Custom configuring available for logging parameters, alarms, and delayed start
FlashLink® PDF Multi-Use Data Logger, Model 40202, 40203
FeatureSpecification
DeltaTrak manufactures products under an ISO 9000 registered quality management system
Measurement Range -40°F to 122°F (-40°C to 50°C)
Temperature Resolution 0.2°F /0.1°C
Accuracy ±1.0°F from -4°F to 113°F; (±0.5°C from -20°C to 45°C)
±2.0°F above 113°F; (±1.0°C above 45°C)
±2.0°F below -4°F; (±1.0°C below -20°C)
Data Capacity 16,112 points
Sample Interval 5 minutes
Data Download Time 30 seconds typical
Factory Programmed Alarm Levels High/low limits over entire temp range
Battery Coin Cell Lithium battery
Dimensions 1.93” x 3.62” x 0.67” (49mm x 92mm x 17mm)
Casing ABS plastic
Weight 1.6 oz. (45.36 grams)
Shock Resistance Withstands 3-foot (1 meter) drop to hard surface
Certification CE Mark, Calibration traceable to NIST, ROHS Compliant, BSS 7061 Compliant
Display LCD, Red LED Alarm
Storage Conditions -4°F to 122°F (-20°C to 50°C) 0% to 95% RH w/o condensation
PDF Standards Complies with ISO19005-1, PDF/A, 21 CFR Part 11
Min. System Requirements PC with current operating system
Adobe Reader
Download Requirements Direct USB connection
Download FlashLink® PDF Multi-Use Data Logger Spec Sheet pdf icon sm