Product

FlashLink® USB Reusable Data Logger, Model 20908

FlashLink USB Logger - ReusableThe FlashLink USB Reusable Data Logger can monitor temperature sensitive commodities in storage facilities, processing environments and during transportation. The built-in USB connector allows for easy programming of logging parameters and downloading recorded data to a PC. Users can configure sample intervals, high and low alarm limits, automatic or manual start, skip alarm, alarm delay, record data in loop mode or to stop when memory is full. Downloaded temperature history is displayed as a PDF with a graph and summary data, including highest and lowest temperatures, average temperature, time spent in alarm, degree minutes and MKT calculations, and when the unit was started, stopped and downloaded. Tabular data and CSV files are also generated by the software, showing details for each data point.

This data logger is an important tool for monitoring ambient air in temperature controlled environments, such as cold storage warehouses, distribution centers, processing areas and in delivery vehicles. It provides valuable temperature history used for making cold chain management decisions, as well as for validation, thermal mapping, and documentation required for audits, inspections and regulatory compliance. FlashPDF Program Manager Software downloads reports as PDF and CSV files, which are easily shared by email and archived.

FlashLink® Reusable Data Logger with External Probe, Models 20902-20903

20902-20903 Reusable USB loggers

The FlashLink USB Reusable Data Logger is also available in two models with single channel, external sensors; one with a blunt tip and one with a sharp tip penetration probe. These reusable loggers have a measurement range of -40°F to 185°F (-40°C to 85°C) and feature a large easy-to-read display which shows the current temperature reading. It also permits viewing the statistics of stored data without downloading; including maximum, minimum, and average temperature, high alarm limit and time in alarm. The USB connections allow for programming and downloading using DeltaTrak's FlashPDF Program Manager or USB Program Manager desktop software. DeltaTrak’s NIST traceable USB Reusable Loggers are essential tools for documenting conditions of temperature sensitive commodities in order to assure quality and integrity.

Model 20908

FlashLink® USB Reusable Data Logger

20908 USB Logger
  • Single channel, internal sensor for ambient air temperature
  • User Programmable: manual or automatic start, sample interval, alarm limits, data tags
  • Large, easy to read LCD display
  • Remaining Battery Indicator (low battery)
  • Trip history statistics available on LCD CEimage
  • NIST traceable and CE Mark
  • USB Connection
FeatureSpecification
DeltaTrak manufactures products under an ISO 9000 registered quality management system
Measurement Range -40°F to 122°F (-40°C to 50°C)
Temperature Resolution 0.1°F/°C
Accuracy ±1.0°F from 14°F to 77°F (±0.5°C from -10°C to 25°C);
±2.0°F above 77°F (±1.0°C above 25°C);
±2.0°F below 14°F (±1.0°C below -10°C)
Data Capacity 3823 data points
Data Download Time 2 seconds typical for 3823 points
Programable Alarm Levels High & Low levels over entire range, displayed on LCD
Battery Coin Cell Lithium Battery, LCD % remaining power indicator
Dimensions/Body 1.575" x 3.189" x .575" (40mm x 81mm x 15mm)
Casing PC/ABS plastic
Weight 1.3 oz. (36 grams)
Shock Resistance Withstands 3-foot (1 meter) drop to hard surface
Certification CE Mark, NIST traceable, RoHS Compliant
Display LCD, Red LED Alarm
Waterproof Rating IP64 with silicon cap on
Storage conditions -4°F to 122°F (-20°C to 50°C) 0% to 95% RH w/o condensation
System Requirements Windows PC with current operating system, Adobe Reader
Programming FlashPDF Program Manager software
Download Requirements Direct USB connection
To download a pdf version of this specification sheet please click here Reusable Data logger

Model 20902-20903

FlashLink® Reusable Data Logger with External Probe

20902 USB reusable data logger
  • Single channel, external probe for product core temperature
  • User Programmable: manual or automatic start, sample interval, alarm limits, data tags
  • Large, easy to read LCD display
  • Remaining Battery Indicator (low battery)
  • Trip history statistics available on LCD
  • NIST traceable and CE Mark
  • USB ConnectionCEimage
FeatureSpecification
Probe Measurement Range -40°F to 185°F (-40°C to 85°C)
Probe Size: Penetration tip (20902) 0.14in Dia x 3.98in L (3.5mm Dia x 101mm L), 3.28 ft (1m) Teflon cable
Blunt tip (20903) 0.15in Dia x 0.98in L (3.8mm Dia x 25mm L), 3.28 ft (1m) Teflon cable
Temperature Resolution 0.1°F/°C
Accuracy ±1.0°F from 14°F to 77°F (±0.5°C from -10°C to 25°C);
±2.0°F above 77°F (±1.0°C above 25°C)
±2.0°F below 14°F (±1.0°C below -10°C)
Data Capacity 3823 data points
Data Download Time 2 seconds typical for 3823 points
Programable Alarm Levels High & Low levels over entire range
Battery (CR2032) 3.6V Lithium/18 months
Dimensions/Body 1.575" x 3.189" x 0.575" (40mm x 81mm x 13mm)
Casing PC/ABS plastic
Certification CE Mark, NIST traceable, RoHS Compliant
Display LCD, Red LED Alarm
Waterproof Rating IP64 with silicon cap on
Storage conditions -4°F to 122°F (-20°C to 50°C) 0% to 95% RH
System Requirements Windows PC with current operating system, Adobe Reader
Programming FlashPDF Program Manager software or USB Program Manager software
Download Requirements Direct USB connection
To download a pdf version of this specification sheet please click here